| Holding END
(flange) of the needle holder, position the
holder vertically into the center hole at the top
of the container. DO NOT PLACE FINGERS ON THE
HOLDER BARREL. |
Slightly
rotate the needle holder a quarter turn to the
left (counterclockwise). While keeping the
fingers OFF the holder's barrel, slowly push the
holder as far downward as it will go. As you push
down three (3) distinct "CLICKS" will
be heard. After the third "click", the
needle will be safely removed and deposited into
the container. |
Needle
removal process is now complete. The large
slotted hole may be used for disposing of most
lancets and butterflies. For increased economy,
gently shake the unit from side to side to
distribute the used needles evenly in the bottom
of the unit. |
